Leak Detection in Sun City, AZ

Leak Detection in Sun City, FAQ

Can you find a leak without breaking anything?

Yes, that's the whole point of electronic detection. We find it first, then open exactly one spot.

My bill doubled, is it always a slab leak?

Not always. Could be an irrigation line, a running toilet, or a pool. We check the whole system.

How do you find a leak without tearing things apart?

We use acoustic listening equipment, pressure isolation testing, thermal imaging, and sometimes tracer gas to pin down the exact spot first. The whole point is to open one small, correct spot instead of tearing into walls or slab while we hunt.

How can I tell if I have a hidden leak?

Watch for a water bill that jumps with no change in how you're using it, a meter that moves when everything's off, a warm spot on the floor, a musty smell, or buckling paint and baseboards. Those indirect signs are how slab and in-wall leaks give themselves away.

Is there a leak test I can do myself?

Yes. Shut off every fixture and appliance, then look at whether the water meter's flow indicator is still moving. If it is, you've got a leak. Shut the valve where water comes into the house and check again, and that tells you whether it's inside the home or outside in the irrigation.

Could my high water bill be the pool or sprinklers, not the house?

Very possibly. In the Valley, pools and big drip irrigation setups are common sources of mystery high bills and water loss. Detection isolates which system is leaking first, so you're not opening a slab when a cracked irrigation line out in the yard is the real problem.

How urgent is chasing down a hidden leak?

Don't wait. A silent leak under a slab or in a wall wastes water around the clock, runs up your bill, and can grow mold or undermine the foundation. The sooner we find it, the smaller and cheaper the repair and the less collateral damage you're left with.

My Sun City home might have polybutylene or galvanized pipe. Should I repipe?

Likely yes. Sun City's 1960s-70s homes often have original galvanized or polybutylene supply lines, and both fail with age, galvanized by corroding and rusting the water, polybutylene by going brittle at the fittings. A repipe to PEX or copper before a hidden failure floods the slab is the smart move. We'll inspect what you've got and explain it plain.